MR B.
Good stone
Excellent quality and will give a super finish to a knife


مواد
سنگ
نام تجاری
پادشاه
رنگ
قهوه ای روشن
ابعاد محصول
18.5L x 6.2W x 1.5H سانتی متر
وزن مورد
1.01 پوند
این یک محصول با کیفیت است سنگ آهن برای استفاده نهایی / چاقوی آشپزخانه اسکنه ای، قیچی، سایر چاقوهای دقیق
قیمت :
فروشگاه :

مواد
سنگ
نام تجاری
پادشاه
رنگ
قهوه ای روشن
ابعاد محصول
18.5L x 6.2W x 1.5H سانتی متر
وزن مورد
1.01 پوند
این یک محصول با کیفیت است سنگ آهن برای استفاده نهایی / چاقوی آشپزخانه اسکنه ای، قیچی، سایر چاقوهای دقیق
بر اساس نظرات آمازون
نظر شما میتونه به بقیه کمک کنه تا انتخاب بهتری داشته باشن خوشحال میشیم اگر تجربه تون از این محصول رو با ما به اشتراک بذارید!
نمایش ۵ نظر آمازون از ۸۷۰ نظر
Good stone
Excellent quality and will give a super finish to a knife
très bonne pierre de finition
Une marque qui ne pose vraiment pas de problème , l'aiguisage de finition miroir ultra tranchant grain 6000 très efficace !
King stones offer incredible performance to value ratio
Cut speed for a 6k is great it leaves superb levels of sharpness and with it being splash and go it's very easy to use. The stone is hard, as it should be you do not want a soft 6k grit stone BUT this stone has a very velvety soft feel to it when sharpening as all king deluxe stones do. I love king deluxe stones they are some of my very favorite, up there with my kuromakus and choceras/naniwa professionals, suehiro cerax and shapton glass stones I own. I love the feel of the King stones, that have more of a clay like feel to them when sharpening that gives very good tactile and audible feedback making you very aware if you are on or off your edge bevel angle. The cut speed isn't up to the level of your vitrified ceramic alumina stones like the kuromakus or choceras or cerax but it's still a fairly fast cutting stone once you have built up a "mud" during sharpening and it polishes very very well, even the 1200 grit king deluxe starts to leave a nice hazy polish and the 6k will take that to a hazy mirror. I will say that the king 6k won't take you to as bright a mirror as other high quality 6ks and leaves a finish that's more close to a 5k finish, it will leave you with a mirror but it will be a slightly hazy mirror. A few passes on a half micron strop after finishing on the 6k and you will have a nice bright mirror. For the money these stones are pretty much untouchable, they are the quality of Naniwa and Shaptons higher end lines of stones but at basically half the cost. I mean for 100 bucks you can get the king 300, 1200, 6k and have a full set of very high performance stone that will provide you with an excellent sharpening experience and excellent results if you do your job well. Would I trade my vitrified alumina stones like my choceras for my king stones? No I wouldn't as they just aren't as fast cutting when it comes to hard high performance steels, and the soaking stones like the 800 and 1200 of the king line are kinda messy as they will form a "mud" but I al
King
Super top
Good mid-high grit stone
Found this while I was looking for natural whetstones, but ordered anyway. The surface was almost perfectly flat on arriving, and felt very smooth. Tried with an already sharpened knife, and it turned out that the knife skidded in the trademark area, so it would be a good idea to remove the trademark paintings before put it into real use. The stone is just above 1cm thick and fixed on the base, which is less than desired to me.