ErrRationale
Works great, looks great
Excellent fan, complimented build aesthetics
۱۷٬۲۵۶٬۰۰۰ تومان

خرید خنککننده هوای Thermalright CPU با فن کاملاً ۹۰ میلیمتری TL- ۹۰۱۵ وات PWM، 4 لوله حرارتی، ارتفاع مدل AXP90-X47 White از میکرولس. [مشخصات فنی] خنک کننده CPU کم مشخصات با کیفیت عالی (47 میلی متر

Thermalright AXP90-X47 White Low Profile CPU Air Cooler with Quite 90mm TL-9015W PWM Fan, 4 Heat Pipes, 47mm Height, for AMD AM4/Intel LGA 1150/1151/1155/1156/1200, White Coated Heatsink
وزن
0.499 کیلوگرم
خنک کننده CPU کم مشخصات با کیفیت عالی (47 میلی متر ارتفاع کل) سازگاری خوب، پلت فرم تمام فلزی، با اتصال دهنده صفحه پشتی، فرآیند لحیم کاری ثانویه پشتیبانی از اینتل: 115X/1200; AMD: AM4 لوله های حرارتی 4×6 میلی متر، نویز ≤22.4DBA، ولتاژ 12 ولت، جریان 0.2 آمپر (MAX) کیفیت خنک کننده CPU Thermalright قابل اعتماد
قیمت :
فروشگاه :

وزن
0.499 کیلوگرم
خنک کننده CPU کم مشخصات با کیفیت عالی (47 میلی متر ارتفاع کل) سازگاری خوب، پلت فرم تمام فلزی، با اتصال دهنده صفحه پشتی، فرآیند لحیم کاری ثانویه پشتیبانی از اینتل: 115X/1200; AMD: AM4 لوله های حرارتی 4×6 میلی متر، نویز ≤22.4DBA، ولتاژ 12 ولت، جریان 0.2 آمپر (MAX) کیفیت خنک کننده CPU Thermalright قابل اعتماد
بر اساس نظرات آمازون
نظر شما میتونه به بقیه کمک کنه تا انتخاب بهتری داشته باشن خوشحال میشیم اگر تجربه تون از این محصول رو با ما به اشتراک بذارید!
نمایش ۵ نظر آمازون از ۹۹ نظر
Works great, looks great
Excellent fan, complimented build aesthetics
Worked like a charm, 15C temp improvement at stock settings
Significant improvement in temperatures over the stock cooler. 14C on both idle and Full Load temps with stock "standard" fan profile.
its quite and does a silent job, barely notice it was on
Package came right on time and worked right away. Looking forward to ordering more in the future
Buen ventilador barato
Muy buen ventilador aunque al principio si me costó ponerlo ya que no explica muy bien pero disipa muy bien el calor de un Ryzen 5 9600x
Dropped the CPU Temp by 20F. Mounting Screws Grommet Issue Easily Correctable.
Was effective in dropping my CPU temp by 20 degress Farenheit. Installation was difficult on my HP Desktop-Elite potato. The stock proprietary HP CPU cooler mount required the use of the LA115X brackets. For this computer model, follow the INTEL LGA 115X guide procedure although the CPU is an AMD. Also the mounting screws' rubber grommets were too short to make contact with the motherboard, because the processor sits high above the board on this computer. Adding a couple of neoprene washers under the grommets allowed for a snug mounting to the motherboard. The kit should come with taller or additional grommets to accomodate this circumstance. The backplate interfered with my re-seating of the motherboard. I used a dremel tool to remove the original chassis mounts that the original CPU cooler was mounted to. This worked because this kit's cooler is held in place to the motherboard by the kit's supplied backplate instead of to under-motherboard chassis mounting threads . A lot of modification was involved with replacing the original CPU cooler with this kit, but it all worked out in the end. Also, check your BIOS. It may allow you to increase the idle CPU fan speed. I set mine to 15% faster and my idle CPU temp dropped from 116F to 87F.