Gerardo M.
Excelente
Muy buen producto
۱۶٬۶۹۵٬۰۰۰ تومان

خرید خنککننده هوای Thermalright CPU AXP-90 X47 با فن کاملاً ۹۰ میلیمتری TL-9015B PWM، 4 لوله حرارتی مدل AXP90-X47 BLACK از میکرولس. [مشخصات فنی] خنک کننده CPU کم مشخصات با کیفیت بالا (47 میلی متر

Thermalright AXP-90 X47 Black Low Profile CPU Air Cooler with Quite 90mm TL-9015B PWM Fan, 4 Heat Pipes, 47mm Height, for AMD AM4/Intel LGA 1150/1151/1155/1156/1200 (AXP-90 X47 Black)
وزن
0.499 کیلوگرم
خنک کننده CPU کم مشخصات با کیفیت بالا (47 میلی متر ارتفاع کل) سازگاری خوب، پلت فرم تمام فلزی، با اتصال صفحه پشتی، فرآیند لحیم کاری ثانویه پشتیبانی از اینتل: 115X/1200; AMD: AM4 لوله های حرارتی 4 × 6 میلی متر، نویز ≤ 22.4 DBA، ولتاژ 12 ولت، جریان 0.2 A (حداکثر) کیفیت خنک کننده CPU Thermalright قابل اعتماد، فرآیند نیکل سیاه، مقاومت در برابر خوردگی، مقاومت در برابر اسید و قلیایی، مقاومت حرارتی کم
قیمت :
فروشگاه :

وزن
0.499 کیلوگرم
خنک کننده CPU کم مشخصات با کیفیت بالا (47 میلی متر ارتفاع کل) سازگاری خوب، پلت فرم تمام فلزی، با اتصال صفحه پشتی، فرآیند لحیم کاری ثانویه پشتیبانی از اینتل: 115X/1200; AMD: AM4 لوله های حرارتی 4 × 6 میلی متر، نویز ≤ 22.4 DBA، ولتاژ 12 ولت، جریان 0.2 A (حداکثر) کیفیت خنک کننده CPU Thermalright قابل اعتماد، فرآیند نیکل سیاه، مقاومت در برابر خوردگی، مقاومت در برابر اسید و قلیایی، مقاومت حرارتی کم
بر اساس نظرات آمازون
نظر شما میتونه به بقیه کمک کنه تا انتخاب بهتری داشته باشن خوشحال میشیم اگر تجربه تون از این محصول رو با ما به اشتراک بذارید!
نمایش ۵ نظر آمازون از ۱۱۴ نظر
Excelente
Muy buen producto
Great low profile cooler
This is a nice cooler...it is in a inwin b1 on a 5700G built around the ASRock b450 itx fatality...my main complaint with noctua similar but more popular offering is the direction it vents, it pushes air out left and right vs up and down so basically airflow is cut off by the memory and IO area ..this one from thermalright is exactly opposite it vents out the top and bottom(with convection mostly top) so this little problem as basically gone, the mounting mechanism defenetly isn't noctuas famously easy to use one but it's effective and considering I'm not going to be taking the cooler off twice a week it's fine and iv defently seen worse on soposedly high end cooling solutions so I have no complaints...if I were to pick a single thing to hone in on with this brand it's the smorgusborg for varients they offer, 36mm copper(black or gray) 43mm aluminum copper or black copper, 53mm in all versions mentioned above, all difrent weights...ya it's a bit much for your average consumer...but that being sead I was able to find 2 that I liked that would not only maximize the height in my specific case wile leaving enough of a gap to pull in air but I also had a choice of color so there is that...but I think to drive my point home here I ended up buying 2 one all black that is soposed to be coated copper and one that is just all copper becase aperently even tho they are the same under the coating they are showing in the description as difrent weight and wattage so we will see about that once I receive the secound all shiny copper heavy one lol...overall I like them they are not over engenered just to make a basic mistake like push the air in a direction that on every itx motherboard made in the last 10years has many large tall things called ram modules RIGHT there basically eliminating any benefits of your product being heavy dense and well built lol...good job thermalright you didn't forget the basics ----------- Update I just received the full copper revision of this model and
Thermalright AXP90
This Low Profile CPU cooler is good for keeping relatively low wattage CPUs cool. I have it installed on P8H77-i ASUS motherboard with an Intel Xeon e3-1230v2 CPU (69W TDP according to Intel). I think the max temp that I saw was 74°C while gaming. It's not too loud either. The installation is not for a first time builder. Now, installing this cooler is an experience. I believe it is referred to as a reverse install. The standoffs are to be installed to the heatsink which *should* extend through the metal backplate. You then hand tighten the fasteners. Make sure you check the edge of the motherboard for flexing. If your motherboard is flexing, the fasteners are too tight. Overall, it's a good low profile 90mm CPU cooler for a low power, small form factor (SFF) build. Follow the installation instructions and be mindful of how tight you tighten the fasteners, it'll be satisfying to know you didn't bork your motherboard when it boots and isn't overheating.
Decent cooler
The fans relatively quiet seems to cool pretty well just the mounting is a little bit finicky but apart from that it cools well and has been working well
Nice!!!!!
Smooth install and it works great so far. I will look for this brand the next time I need a cooler.