فیلامنت eSUN ABS+ 1.75 میلی متر، رشته پرینتر سه بعدی ABS Plus، دقت ابعادی +/- 0.05 میلی متر، رشته چاپ سه بعدی قرقره 1 کیلوگرمی (1 کیلوگرم) برای چاپگر سه بعدی، سفید سرد

خانه داشبورد علاقه‌مندی سبد خرید سفارشات

داری، کلیک کن

تخفیف ویژه خرید اولی‌ها! تا ۵٪ هزینه خدمات کمتر برای اولین سفارش شما 🎁

خانه داشبورد علاقه‌مندی سبد خرید سفارشات

امتیاز و نظرات

3.9

۷۷نظر

بر اساس نظرات آمازون

نظر شما میتونه به بقیه کمک کنه تا انتخاب بهتری داشته باشن خوشحال میشیم اگر تجربه تون از این محصول رو با ما به اشتراک بذارید!

نمایش ۵ نظر آمازون از ۷۷ نظر

Dave O.

Reviewed in the United States on 11 December 2024

Great layer adhesion. Stuck to the plate good.

This is the first ABS I've printed. I used the recommended settings on a Bambu Labs P1S. I am printing some refill spools and was worried about them lifting off. I used heater and blanket to keep the chamber at 120°F and glue stick on a textured PEI plate. I printed off 6 halves and they all stayed on the plate and didn't have any layer separation. I stopped using the blanket and it still worked good. I had to go to work and didn't want to leave the heater going for hours while it wasn't printing, so I printed one without the chamber heater or blanket, just the plate and hot end were heated and it still printed perfect. ABS that prints fairly quickly without lifting or separating. I'm impressed and ordering more. I have a Bento Box and the stock charcoal filter and still had a little bit of smell in the room. I had a fan blowing the air out of the window and it kept the smell down pretty good. I could only notice it right by the printer. I'm really impressed. I have printed a bit of ASA and will have some lifting and layer adhesion issues with it once in a while. No problems with this stuff, and the price is good, too.

5.0

R. Pickel

Reviewed in the United States on 27 October 2025

Some colors are worth the money, but Cool White is simply awful material.

This filament is really strange. I've had good luck with some of the colors, and others are absolutely terrible. The purple is sublimely smooth and prints very well. The fire engine red is a beautiful shade of rich red and prints nicely. No clogs or feed problems. Conversely, the "cool white" will not stick to itself, period. It's a very dry and brittle ABS, like they left out some kind of emulsifying agent that lets it flow. I dried it out, set my printer to the maximum nozzle temp for this filament (270C) and maximum plate temp (110C), and it just will not melt and stick to itself very well. While I got a few successful prints, they all have weird random layers that just don't adhere to the one before, and they all crack brutally when they cool because so many layers have poor adhesion to each other. And if you have a complicated design that requires supports that are not on the build plate, forget it... because the "cool white" supports WILL NOT stick to the model, will just fall over and spaghetti, and leave your overhang unsupported, resulting in even more spaghetti. I've wasted so much time and money trying to get the white to work, and it's a lost cause. The only positive to the poor adhesion is that supports are very easy to remove because this stuff will not stick to itself. The other colors aren't bad, but the cool white is just awful.

2.0

Steve Kamerman

Reviewed in the United States on 25 January 2024

Layer adhesion is terrible

This filament is beautiful and prints very nicely on my Voron 0.1 and ZeroG Mercury One. The bed adhesion is very good but the layer adhesion is the worst I've seen in dozens of types of filament, including 10+ different eSUN ABS and ABS+ filaments. I should have read the reviews before I bought it. I've tried the following things to improve layer adhesion, but none helped and as a result, I can't use this for any functional parts. 1. Printed at 245C, 255C and all the way up to 275C 2. Printed slowly (20mm/s) to let the nozzle heat the lower layer 3. Increased line thickness to press the layer into the layer beneath it 4. Increased flow to press the layer into the layer beneath it 5. Printed layers with thickness 0.12, 0.20, 0.28 6. Printed with bed temps from 90C to 110C This really is the only filament I have that has this issue and I think it has something to do with the additives for color or finish (the material is matte when printed). It's very sad because I love the way the parts look. In the end, I would only use this filament for parts that are under no stress at all.

3.0

dustyn

Reviewed in the United States on 25 May 2026

Great Filament

Works great not much else to say, always happy with their products

Wrightrucker

Reviewed in the United States on 9 September 2025

Good filiment except for winding

Printed very good but took away a star because winding on spool wasn't very good..

4.0

میکرولس، برند ثبت‌شده

میکرولس، برند ثبت‌شده

فیلامنت eSUN ABS+ 1.75 میلی متر، رشته پرینتر سه بعدی ABS Plus، دقت ابعادی +/- 0.05 میلی متر، رشته چاپ سه بعدی قرقره 1 کیلوگرمی (1 کیلوگرم) برای چاپگر سه بعدی، سفید سرد

مشخصات فنی

درباره محصول

مشخصات فنی

درباره محصول

امتیاز و نظرات

Dave O.

R. Pickel

Steve Kamerman

dustyn

Wrightrucker

فیلامنت eSUN ABS+ 1.75 میلی متر، رشته پرینتر سه بعدی ABS Plus، دقت ابعادی +/- 0.05 میلی متر، رشته چاپ سه بعدی قرقره 1 کیلوگرمی (1 کیلوگرم) برای چاپگر سه بعدی، سفید سرد

مشخصات فنی

درباره محصول

مشخصات فنی

درباره محصول

امتیاز و نظرات

Dave O.

R. Pickel

Steve Kamerman

dustyn

Wrightrucker