منصور علي الجعيد
سماكة المنتج نحيفة جداً وقوية
ممتاز وسماكة نحيفة جداً بين الشاشة والحائط


QualGear QG-TM-002-BLK 37-Inch to 70-Inch Universal Ultra Slim Low Profile Fixed Wall Mount LED TVs
نوع نصب
پایه دیواری
نوع حرکت
ثابت شد
نام تجاری
QualGear
مواد
چوب
رنگ
سیاه
نوع نصب: ثابت سایزهای تلویزیون پشتیبانی شده: 37 تا 70 اینچ حداکثر ظرفیت وزن: 88 پوند الگوهای سوراخ نصب پشتیبانی شده (VESA): 200x200mm تا 800x400mm
قیمت :
فروشگاه :

نوع نصب
پایه دیواری
نوع حرکت
ثابت شد
نام تجاری
QualGear
مواد
چوب
رنگ
سیاه
نوع نصب: ثابت سایزهای تلویزیون پشتیبانی شده: 37 تا 70 اینچ حداکثر ظرفیت وزن: 88 پوند الگوهای سوراخ نصب پشتیبانی شده (VESA): 200x200mm تا 800x400mm
بر اساس نظرات آمازون
نظر شما میتونه به بقیه کمک کنه تا انتخاب بهتری داشته باشن خوشحال میشیم اگر تجربه تون از این محصول رو با ما به اشتراک بذارید!
نمایش ۵ نظر آمازون از ۱٬۵۰۵ نظر
سماكة المنتج نحيفة جداً وقوية
ممتاز وسماكة نحيفة جداً بين الشاشة والحائط
Ok
ood low profile
Great value, clearance perfect
Great product, very tight to the wall. You will need a tv that has its inputs to the side as there is no clearance if plugged straight into the back of tv
SLIM is what you want, THIS is the mount
After reading MANY reviews and looking at three similar products each double to triple the price, I decided to go with this for my new Panasonic 65" mini-led TV. I wanted it flat on the wall, with no need to position or rotate/tilt. This offered the closest application to the wall .4/.5" - I'm happy to report it worked perfectly. Now, you can flex the bar with your two hands OFF the wall, but secured to the wall it's more than strong enough to hold the properly sized/weighted tv. Don't be afraid. Had every part necessary imaginable included with multiple screw sizes. I was fortunate my application hit TWO STUDS so I'm very confident of its installation. DO pre-drill out the screw-holes at LEAST 3" inches deep as the thick lag screws are a BEAR to screw into the studs easily. My only mistake was not having a metric Socket wrench to make their tightening easier. You WILL STRIP the screws with a Phillips screwdriver and practically strip your hand in the process. PLEASE do yourself a favor and have the appropriate size socket wrench/head available and you'll be fine. I used four lag screws into the studs and it felt very secure. I would suggest if you don't hit two studs to increase your four screws to SIX if you are using in drywall applications. I think adding the additional screws will stabilize the wall plate. Do yourself a favor and loop a LONG string between the pull-downs that clip the bottom of the holder into place AFTER handing the tv. it will be IMPOSSIBLE to try to grab them once on the wall .. impossible. Pull down and click into place and then you can cut the string and remove it so it's not visible or tuck it up behind for future use. I'm a thoroughly impressed by the relative ease, contents and SLIM attachment to the wall. I'd buy this again and look no further.
easy to follow
They thought of everything including a small level! The instruction were more than adequate, easy to follow, lots of pictures. I've lost count of the number of TV wall mounts iv'e purchased over the years but, to the best of my recollection, none of them were as robust as this!