Onager
Very nice camera, after resolving some setup issues.
Update: The initial network settings for the camera were not as indicated by the setup guide so the Camera did not show up on the network either via DHCP nor at the fixed address 192.168.1.110 indicated in the setup guide. HOMEOR support did respond quickly to help me resolve the issue, turns out the camera was configured to a different fixed address such that it would not be visible on my network, support suggested "SADP tool" which was able to identify the Fixed IP address that the camera was actually using and change it, note this only seems to work when both the camera and your pc/laptop are connected via ethernet (not wifi). I also had an issue with the autofocus when I initially tested it inside prior to mounting which turned out to be related to being too close to the object, ie (macro mode) within 4ft or so, even still, I was able to focus at this 3-4' range but I had to do it manually. Must say, when focussed the camera image quality is stellar. I've now mounted outside and the camera and AF both work fine. One bugaboo is I'm unable to access the advanced Onvif menus once its plugged into my NVR, more likely an issue with my (Lorex) NVR Switch blocking things than anything the camera is doing. Once I'm happy with these settings I shouldn't have to access these menus very often, but for now I have to unplug the camera from the NVR and plug it into my network directly to access these camera setting menus unless I can figure out how to do it through the NVR.