پمپ DC بدون برس 12 ولت Zunate، مینی کامپیوتر G1 4in، پمپ
پمپ DC بدون برس 12 ولت Zunate، مینی کامپیوتر G1 4in، پمپ
Zunate 12v Brushless DC Pump, G1/4in Mini Computer, 600LH 3600RPM Rotate Speed Water Cooling Pump with Left Water Outlet for PC
برند: Zunate
توضیحات محصول
11 × 9 × 7 سانتی متر؛ 275 گرم: ابعاد بسته بندی
:
3 سپتامبر 2024: تاریخ برای اولین بار در دسترس است
:
زونات: سازنده
:
زوناتف3وکسقمزخو: شماره مدل کالا
:
مشخصات فنی
وزن
0.275 کیلوگرم
درباره محصول
Plug-and-play و می تواند مستقیماً با یک کانکتور برق 3 پین استاندارد به منبع تغذیه رایانه متصل شود.
سرعت چرخش 3600 RPM تا حد زیادی به دفع گرمای زیاد کمک می کند.
سرعت 600L/H اتلاف گرما را بسیار کارآمد می کند.
راه خروج آب سمت چپ را انتخاب کنید و با براکت، استفاده آسان را داشته باشید.
قابل استفاده برای رابط رزوه ای G1/4in، تعویض نازل های مختلف آب برای کاربران راحت است.
Plug-and-play و می تواند مستقیماً با یک کانکتور برق 3 پین استاندارد به منبع تغذیه رایانه متصل شود.
سرعت چرخش 3600 RPM تا حد زیادی به دفع گرمای زیاد کمک می کند.
سرعت 600L/H اتلاف گرما را بسیار کارآمد می کند.
راه خروج آب سمت چپ را انتخاب کنید و با براکت، استفاده آسان را داشته باشید.
قابل استفاده برای رابط رزوه ای G1/4in، تعویض نازل های مختلف آب برای کاربران راحت است.
نظر شما میتونه به بقیه کمک کنه تا انتخاب بهتری داشته باشن خوشحال میشیم اگر تجربه تون از این محصول رو با ما به اشتراک بذارید!
نمایش ۴ نظر آمازون از ۹ نظر
Otis
Reviewed in the United States on 18 January 2025
Quiet and moves a lot of water
I have a non-computer application where I need to pump water for cooling. The combo units with reservoirs got really bad reviews, so I wanted a pump that does one thing well: pump water. As far as pumps go, overall this thing is a winner. Pros: Brushless motor which should have less wear over time than standard motors. This thing is quiet, real quiet, barely a hum when running. No leaks. Moves water consistently after priming and purging air. Cons: It is not self-priming but doesn't claim to be, so yeah that is a hassle. Not positive displacement so water can backflow when off, again not a claim but just for awareness. Air pockets in line will cause pump to cavitate and stop pumping, so purge the system. I did some bench testing before putting this into service. The 600 l/h rate is probably lab conditions with no attachments. Running with 4ft of 1/4 vinyl tubing drops the rate to about 130 l/h. Add a cooling block and that drops down to 90 l/h. That is still an absurd amount of water movement (well over a liter a minute). I don't have another device to compare to, but a little research indicates this is normal.
5.0
kyle tanier
Reviewed in the United States on 28 February 2026
meh
ive ordered so many of these, they do work but theyre a bit weak and i cant seem to get a "new style" with the insert so theyve all began leaking eventually due to the plastic deforming in the threads over time. nothing a healthy sanding and JBWeld application didnt fix but it looked bad so ive replaced them all with D5 pumps now. its insane how much more flow the quality pumps have.
3.0
Anderson
Reviewed in the United States on 12 October 2025
Stopped same day.
It only lasted about 3 hours. It still vibrates like it is spinning and is not hot like it is stalled, but there is no flow. It may only be suitable for low pressure high flow.
1.0
WT
Reviewed in the United States on 21 February 2025
Very quiet but no brass thread inserts
I'm using it to water-cool a CPU. OUT OF BOX: The product description shows pictures of brass inserts for the threads. The item I got has no inserts..just plastic. That's how the pump I'm replacing failed. The plastic eventually cracked (and made a mess). Minus 2 stars because that is why I bought it. FIRST DAY: 2/20/2025. It's very noisy when dry and quiets down considerably when there is coolant moving but still crackles because of the tiny bubbles that are still in it. Once the bubbles clear out, it it is almost dead silent at max voltage (via motherboard). I couldn't even hear it from 7 inches with all other fans turned off. It does seem to move decent water. I couldn't get a flow rate measurement with a kitchen sink setup because it was so picky to get primed. My computer setup forces the pump to prime because everything gravity-feeds to force air out.
