Amazon Customer
Reviewed in Canada on 30 March 2026
Great Case
Perfect
5.0
جستجو در
جستجو یا وارد کردن لینک کالای :
Rosewill 4U Server Chassis Rackmount Case | 7 3.5" Bays, 2 5.25" Devices| ATX, CEB Compatible | 1 120mm PWM Fan, 2 80mm PWM Fans | 2X USB 3.0 | Front Panel Lock and Key | Silver/Black - RSV-R4100U
نام تجاری
روزویل
سازگاری مادربرد
ATX
نوع مورد
برج
کاربردهای توصیه شده برای محصول
تجارت
رنگ
17.7 اینچ عمق
شاسی جادار: این کیس سرور عظیم 4U دارای 7 جایگاه داخلی HDD 35 اینچی به همراه اتاق برای 2 دستگاه 525 اینچی دیگر است. قابل ارتقا و سازگار با ATX/CEB: 7 اسلات توسعه PCI و سازگاری مادربرد ATX و CEB گزینههای رشد برای همه نیازهای شما را در اختیار شما قرار میدهد. خنککننده بیصدا: 4 فن خنککننده از پیش نصبشده، جریان هوا و حفاظت حرارتی عالی را با نویز کاهشیافته ارائه میدهند. 1 فن جلویی 120 میلیمتری و 2 فن 80 میلیمتری عقب از گرم شدن بیش از حد درایوها و شاسی شما جلوگیری میکند.
قیمت :
فروشگاه :
نام تجاری
روزویل
سازگاری مادربرد
ATX
نوع مورد
برج
کاربردهای توصیه شده برای محصول
تجارت
رنگ
17.7 اینچ عمق
شاسی جادار: این کیس سرور عظیم 4U دارای 7 جایگاه داخلی HDD 35 اینچی به همراه اتاق برای 2 دستگاه 525 اینچی دیگر است. قابل ارتقا و سازگار با ATX/CEB: 7 اسلات توسعه PCI و سازگاری مادربرد ATX و CEB گزینههای رشد برای همه نیازهای شما را در اختیار شما قرار میدهد. خنککننده بیصدا: 4 فن خنککننده از پیش نصبشده، جریان هوا و حفاظت حرارتی عالی را با نویز کاهشیافته ارائه میدهند. 1 فن جلویی 120 میلیمتری و 2 فن 80 میلیمتری عقب از گرم شدن بیش از حد درایوها و شاسی شما جلوگیری میکند.
بر اساس نظرات آمازون
نظر شما میتونه به بقیه کمک کنه تا انتخاب بهتری داشته باشن خوشحال میشیم اگر تجربه تون از این محصول رو با ما به اشتراک بذارید!
نمایش ۵ نظر آمازون از ۹۸ نظر
Great Case
Perfect
For what it says it is good. I should have looked closer.
This case ends up being basically a standard tower that lies on it's side. It does not use up close to the length of a standard 4U server. This may be important if you are looking at the photos and misjudging dimensions at a glance. I have currently 8 drives in it, and it is pretty packed and the ventilation could be a lot better. This is no fault of this chassis. It is good for what it does and it is well constructed. If you are expecting it to be longer in length with a lot of room for additional air flow, fans, and such then this is not the model to get. If you want something that is basically a standard tower (not a full big tower) that can easily be rack mounted then this will work fine for your needs. I am using it for an UNRAID server.
Fits full-sized components
Fits ATX board with a full sized GPU and PCIe cards (including cable clearance) Good fan flow and space for drive bays etc
Like these - Some issues
I was looking for some cases for a budget server rack build. I ran across this one. Fit the design, and made by a manufacturer I was familiar with (unlike other manufacturers that just string a bunch of nonsense letters together). Case was decent enough. A couple of quibbles. 1) The cross bar is highly unusable if you are using anything substantial for a CPU cooler. But, it is removable, and doesn't seem to provide any real benefit anyway. I realize this is for GPU bracing, but really, you don't want / need this anyway for that purpose. 2) The intake filter is not easy to get to and kind of defeats the purpose of serviceability. To get this thin, under performing filter out of there to service, you have to literally take the fan bracket out of the case. This is not easy feat. Not sure why no one thought this a problem during design. I personally removed it completely to ensure good airflow anyway. The filter restricts a lot of it. 3) The handles don't seem very strong. Personally, I wouldn't allow the full weight of a built server to be suspended from these handles for any length of time. They likely will crack or break completely. They are good for sliding the case forward for rack removal though. 4) Case came with pre-installed MB standoffs. If you want to thread in more, this becomes an issue. I bought 5 of these cases. And, on each and every one, the extra standoffs (for full ATX installation), were not threaded at all. Which means you have to carefully thread in the standoffs into the unthreaded holes slowly, so they create a thread in the (thankfully) soft aluminum. This works, but geez, why aren't the holes pre-threaded? All in all, good budget rack mount case when money is tight. Just be aware of the pitfalls.
Fits in standard rack, and fits most gpu
I bought two of these for building a streaming pc and an Instant replay pc for my video production company. Fits our standard atx motherboards and a rtx 3060 no problem. You will need to make sure you have a heat sink that is 92mm or less, or else the lid won’t close