قاب کامپیوتری Micro ATX Case: MATX Case Mini PC ITX Desktop Computer Case پشتیبانی از Micro ATX MATX DTX ITX Mini PC با USB3.0، پشتیبانی از HDD 3.5 اینچی (مشکی)

خانه داشبورد علاقه‌مندی سبد خرید سفارشات

داری، کلیک کن

تخفیف ویژه خرید اولی‌ها! تا ۵٪ هزینه خدمات کمتر برای اولین سفارش شما 🎁

خانه داشبورد علاقه‌مندی سبد خرید سفارشات

امتیاز و نظرات

3.9

۲۷۲نظر

بر اساس نظرات آمازون

نظر شما میتونه به بقیه کمک کنه تا انتخاب بهتری داشته باشن خوشحال میشیم اگر تجربه تون از این محصول رو با ما به اشتراک بذارید!

نمایش ۵ نظر آمازون از ۲۷۲ نظر

C. Thompson

Reviewed in the United States on 8 March 2025

Great, compact, utilitarian case for not much money

I first bought this case when I wanted a more compact case to sell a server I no longer needed. This was very cheap and I didn't want to spend a lot of money on something I was just going to sell. Well, the case looks nice and is really the perfect size for a compact micro-ATX or mini-ITX based computer that has some extra components that require something bigger than the smallest form factor cases. This case is nothing particularly fancy but it does the job well. I liked this case so much I bought another one to use for one of my own servers that I'm keeping. I'll buy it again when I build another server for myself. Just goes to show that something doesn't need to be expensive to be good.

5.0

Jacob SP

Reviewed in Mexico on 31 July 2025

Buena, pero difícil de armar

Usandola con una placa mATX, todo cabe bastante apretado. Olvídate de usar ventiladores de 25mm de grosor, incluso los de 15mm están apretados. Igual el pcb de los botones y los puertos estorba mucho para meter la placa. Con mucho cuidado y paciencia es posible.

Alex

Reviewed in Canada on 8 April 2025

Nice little case

Great size, fit my B450 prime with an RX570. The mobo mount screws from my old case didn’t work, which took me a while to figure out because I didn’t notice they included mounting hardware. Since it doesn’t come with any fans I’d also recommend getting a few small fans as well just so your system doesn’t suffocate.

Auto-bdy tech 2007

Reviewed in Canada on 13 September 2024

I want to share which components fit well inside this case

I like the case. It takes a full size at power supply which is good for ryzen 7 5800x. But it's a hot processor and I first ordered 120mmx25 front fans and they didn't fit so I went with 2 noctuna NF-A12x15 for the front and they fit perfectly but don't squeeze the case on the front picking up the computer puts enough force that the front panel will touch the spinning fans. They could use washers behind them. just be careful to shut it down before you pick it up to move it and you'll be fine. The cpu cooler was 7/10 hard to install I first went with a smaller noctuna model number in the photos but replaced it with NH-C14S which is the absolute largest intel/am4/am5 cooler I could install. While tucking the wires to the side I can still add ram and replace the ssd with the cooler installed. I used a micro screwdriver to plug in the cpu fan because it was such a tight spot to get into. I used an extention first from the 120mm fans to help because the large cpu fan barely reached my motherboard plugin. I used a splitter for the two front 120mmx15mm noctuna fans and I put an 80mmx25mm noctuna fan on the back. The temps were at 70 and 80 degrees just running unraid and a single vm with smaller cpu cooler the large cooler keeps idle at 49 degrees c and 60-65 under heavy load running benchmarks which is just fine. This was a quick build but I had to experiment with which fans all fit the fans cost more than the box itself I spent $200 on cooling fans. If I did it again I'd pick a larger box that comes with fans already. But now that it's already together and running my surveillance system I'm glad it has a small footprint. Enjoy the photos they show which components fit to maximize cooling. I figured 550 was plenty for power supply 105watts for the 5800x and 100w gtx1030 was all I needed for a gpu to run code project ai and agent dvr with ai object detection. I picked up a 2 tb nvme xpg gammix I had laying around and the cpu came from my other server I recently on Amazon p

4.0

Phill

Reviewed in the United States on 12 July 2026

To big to be SFF, to small for a standard CPU cooler.

Not bad, and it does work. But I won't be buying one again... 1/2 in wider, and a standard CPU cooler would fit (not a low-profile one). 1/4 in deeper, and the front-plate board wouldn't be pushed against the MB. And getting the MB in was a bit touchy, trying to angle it just right. And definitely plan fan-placement ahead of time.

3.0

میکرولس، برند ثبت‌شده

میکرولس، برند ثبت‌شده

قاب کامپیوتری Micro ATX Case: MATX Case Mini PC ITX Desktop Computer Case پشتیبانی از Micro ATX MATX DTX ITX Mini PC با USB3.0، پشتیبانی از HDD 3.5 اینچی (مشکی)

مشخصات فنی

درباره محصول

مشخصات فنی

درباره محصول

امتیاز و نظرات

C. Thompson

Jacob SP

Alex

Auto-bdy tech 2007

Phill

قاب کامپیوتری Micro ATX Case: MATX Case Mini PC ITX Desktop Computer Case پشتیبانی از Micro ATX MATX DTX ITX Mini PC با USB3.0، پشتیبانی از HDD 3.5 اینچی (مشکی)

مشخصات فنی

درباره محصول

مشخصات فنی

درباره محصول

امتیاز و نظرات

C. Thompson

Jacob SP

Alex

Auto-bdy tech 2007

Phill