LSI 9201-8i RAID Controller Card 6G HBA FW P20 9211-8i IT Mode ZFS FreeNAS unRAID SAS PCI E Expander Card + 2*SFF-8087 SATA
نام تجاری
LANPAN
رابط سخت افزاری
SAS
سبک
مدرن
وزن مورد
0.28 کیلوگرم
دستگاه های سازگار
کامپیوتر شخصی
مدل:LSI 9201-8I ; کنترلر: LSI SAS2008 سفتافزار (FW): IT Mode; سرعت انتقال داده: 6 گیگابیت بر ثانیه رابط میزبان: PCI E 2.0 اتصالات داخلی: Two Mini-SAS SFF8087 لیست بسته بندی：Controller Card：1 ; کابل: 2
قیمت :
فروشگاه :
نام تجاری
LANPAN
رابط سخت افزاری
SAS
سبک
مدرن
وزن مورد
0.28 کیلوگرم
دستگاه های سازگار
کامپیوتر شخصی
مدل:LSI 9201-8I ; کنترلر: LSI SAS2008 سفتافزار (FW): IT Mode; سرعت انتقال داده: 6 گیگابیت بر ثانیه رابط میزبان: PCI E 2.0 اتصالات داخلی: Two Mini-SAS SFF8087 لیست بسته بندی：Controller Card：1 ; کابل: 2
بر اساس نظرات آمازون
نظر شما میتونه به بقیه کمک کنه تا انتخاب بهتری داشته باشن خوشحال میشیم اگر تجربه تون از این محصول رو با ما به اشتراک بذارید!
نمایش ۵ نظر آمازون از ۵۹ نظر
Great deal for the cost versus a NAS
Plugged it in and it was compatible and was immediately detected and it and all my disks showed up in my linux operating system. Cant get much simpler or faster for this for a cheap HBA.
No issues for TrueNas system
Was picked up without issue by TrueNas Scale on desktop grade hardware. Being used to drive a pool of SSD disks. So far, so good.
Works great
Works great on the ASUS X670E-PRO WIFI motherboard in the x4 PCIe socket (physically x16) which is the only slot I had free after installing a GPU. Research informed me that using the HBA in an x4 socket (rather than x8) would halve the bandwidth, but this turned out to be a non-issue because theoretically even 16 drives reading simultaneously will have a hard time saturating an x4 socket. True plug-n-play HBA, just worked.
Works with Proxmox
I used this when setting up a new Proxmox server. Works with kernel 6.12.
Nice HBA card for UnRAID server and already in IT Mode!
I purchased this HBA card back in June for an UnRAID system I built and it has been performing well. I currently have 7 SATA drives connected to this card. The card was plug n play and already in IT mode. I simply installed the card and attached my drives. and powered up the system. All drives were instantly recognized. What I like: - Ease of installation - Value for money - Speed - Compatibility What I dislike: - N/A
