بلوک CPU ویژه حرفه ای برای سیستم خنک کننده آب INTEL Computer Clear (شفاف)
بلوک CPU ویژه حرفه ای برای سیستم خنک کننده آب INTEL Computer Clear (شفاف)
Professional Special CPU Waterblock For INTEL Water Cool System Computer Clear (Transparent)
برند: BXQINLENX
مشخصات فنی
ابعاد محصول
5L x 0.3W x 5H سانتی متر
نام تجاری
BXQINLENX
نوع کانکتور برق
4-پین
روش خنک کننده
آب
دستگاه های سازگار
دسکتاپ
درباره محصول
بلوک مخصوص CPU برای INTEL
پایه مسی با کارایی بالا 50 × 50 × 3 میلی متر
رزوه های G1/4 اینچی (اتصالات گنجانده نشده است).
سازگار با اکثر اتصالات فشرده سازی
فروخته شده توسط LENX
جدول مشخصات
ابعاد محصول5L x 0.3W x 5H سانتی متر
نام تجاریBXQINLENX
نوع کانکتور برق4-پین
روش خنک کنندهآب
دستگاه های سازگاردسکتاپ
نوع اتصال دهنده برق4-پین
روش خنک کننده (2)آب
دستگاه های سازگار (2)دسکتاپ
ابعاد مورد L x W x H5L x 0.3W x 5H سانتی متر
نوع موادمس
نام تجاری (2)BXQINLENX
سازندهBXQINLENX
تعداد آیتم ها5
تعداد واحد1.0 شمارش
وزن مورد68 گرم
مدلSHIZI-CLEAR
شماره قطعهSHIZI-CLEAR
نظرات مشتریان4.14.1 از 5 ستاره (70) 4.1 از 5 ستاره
دلیل برگرداندندوره بازگشت
معیوب، هر دلیل دیگری، آیتم اشتباه یا گم شده، آسیب فیزیکی30 روز از تحویل
بلوک مخصوص CPU برای INTEL
پایه مسی با کارایی بالا 50 × 50 × 3 میلی متر
رزوه های G1/4 اینچی (اتصالات گنجانده نشده است).
سازگار با اکثر اتصالات فشرده سازی
فروخته شده توسط LENX
جدول مشخصات
ابعاد محصول5L x 0.3W x 5H سانتی متر
نام تجاریBXQINLENX
نوع کانکتور برق4-پین
روش خنک کنندهآب
دستگاه های سازگاردسکتاپ
نوع اتصال دهنده برق4-پین
روش خنک کننده (2)آب
دستگاه های سازگار (2)دسکتاپ
ابعاد مورد L x W x H5L x 0.3W x 5H سانتی متر
نوع موادمس
نام تجاری (2)BXQINLENX
سازندهBXQINLENX
تعداد آیتم ها5
تعداد واحد1.0 شمارش
وزن مورد68 گرم
مدلSHIZI-CLEAR
شماره قطعهSHIZI-CLEAR
نظرات مشتریان4.14.1 از 5 ستاره (70) 4.1 از 5 ستاره
دلیل برگرداندندوره بازگشت
معیوب، هر دلیل دیگری، آیتم اشتباه یا گم شده، آسیب فیزیکی30 روز از تحویل
امتیاز و نظرات
4.1
۷۰نظر
بر اساس نظرات آمازون
نظر شما میتونه به بقیه کمک کنه تا انتخاب بهتری داشته باشن خوشحال میشیم اگر تجربه تون از این محصول رو با ما به اشتراک بذارید!
نمایش ۵ نظر آمازون از ۷۰ نظر
OrtizArman Photography and Graphic Design
Reviewed in the United States on 10 May 2025
Very, very understated product - did wonders for my custom-built water-cooling system.
OMG!!! It is NOT flashy. It is NOT RGB. It is NOT main-brand. BUT it is great and EFFICIENT! For those who like numbers, here are some for you: Installed in a 12-core AMD processor: Ryzen 7900. If running at ~5GHz, it used to run at >125 degrees Celsius, from what I recall. This was only in testing; I kept my desktop at ~4GHz (still running at >80 degrees, with an AIO!), which is NOT what I spent money for. After this "cheap" - but effective - water cooling solution (more details in a moment), average temps for same processor, but running at max 5.4-5.6GHz were <80 degrees Celsius. More importantly, at my usual ~4GHz, the computer was running at <60 degrees. Seriously? Now, for more details, this cooler was running AFTER the GPU cooler in the loop. Here is how my loop went, which is rare from what I have seen. I had a small pump with integrated, small reservoir. Water went to 120mm radiator with fan. Then, to GPU (RTX 3060, kept at 25 Celsius under these conditions). Then, to CPU (this cooler). Then (here is the kicker) to a 240mm radiator on the opposite side of the PC case with 4 fans (push-push setup, very fast fans), and then back to the little pump. All on FLEXIBLE lines, with good case cooling. Now, under full load, very heavy gaming, or during benchmarking or testing, my GPU was running at 54 Celsius MAX (under 100% load), and the CPU was running at <90 Celsius. My next build will invert the flow, to go to CPU first and then GPU, since I can cool GPU with air as well. Anyway, all that for context - that this little, underpriced, non-main-brand item is VERY effective if combined with a well-built water-cooling system.
5.0
Scott
Reviewed in the United States on 20 August 2019
EXCELLENT COOLER --BUT-- NOT ENOUGH HARDWARE!
FIRST: THE BAD- GET METAL WASHERS! This kit could be perfect with that one inclusion. The problem is that the nylon washers included are not for support, they are for insulation, metal washers on each side of them would help greatly with making the mounting system sturdy. The other problem is that the springs can slip between the screw and the CPU Cooler making them not only useless but a hinderance to getting the cooler snugged down. I had to remove two of them with a pair of pliers that stretched and ruined them, I tossed them in the garbage. AGAIN, metal washer under them would have solved this issue perfectly! I had my old cooler bracket that used on the back of my board and metal washers over the nylon washers on the front of the board. With this mod, I was able to tighten the nuts much more securely and that offered a stable mount for the cooler. THE GOOD: This cooler itself is just about perfect!! The bracket is strong and does not flex. The copper contact pad is LARGE and not only thick, but the front is cut in trenches and grooves to increase the surface areas and gather a lot of heat. The plexi top is thick with well defined nipple threads and is sealed well with NO leaks. Where the nipples thread in, on the underside of the plexi it is cut deeper into half moon arcs that I think really aids in the transfer of cooled and hot fluids and it offers a small well area. I am VERY pleased with this cooler and it VERY WELL! With NO paste, cream or pad between the CPU and the cooler, my temp avg about 135 degrees from idle to light use. With light gaming my temp rose to avg 145 to 170 degrees that ocasionally spiked to about 185 degrees. With my i7 4770 overclocked (bootstrap set to 165) and a heat pad installed, my idle is now about 105 and with heavy gaming it does not go above 140 degrees. EXCELLENT COOLER!! Just don't forget to add a few metal washers.
5.0
Jason Krueger
Reviewed in the United States on 17 December 2019
QA assembly
As an engineer I figured its an extremely simple design, how could anybody mess it up? Well, I got my answer.... assembly. There was a little spot where it pinched the o-ring and started to drip. Wasn't a bad leak, but a leak sitting right on a motherboard isn't good regardless. So pulled it apart for closer inspection and located the pinched spot. Unfortunately it's a combination of wrong type of o-ring and assembly. Even separating the shell didn't make any difference. It had been pinched for so long that the o-ring was permanently damaged. Could measure it and go to McMaster-Carr or Granger and likely get a replacement but I was angry enough to spend the money on a different one. What a waste, since it had good potential to be a simple low cost cpu exchanger.
1.0
R
Reviewed in the United States on 1 April 2019
Fantastic performance for the price
Currently using it as a GPU cooler for my Vega 64. Part of a CPU/GPU loop on a 420mm Rad. Under load on the GPU temps are maxing at 40c, same for HBM. Works incredibly well for it being less than $20 and I can't see how I would get better performance by spending up.
5.0
D. PH
Reviewed in the United States on 5 April 2023
Good for non-overclock users.
I bought this one because it looks cool and cheap. In term of the price, it worth 5 stars. However, there are two problems I found. Firstly, it has no backplate. It means the motherboard will receive all force when I try to tie it down to the CPU. Secondly, it has a pretty low flow. When the PC was in a normal mode, it kept the CPU temp stable at 39. When the PC was in an overclock mode, the CPU temp was jump up to 81-86 within a min although the pump and fan were at max speed. When I replaced it with the old Swiftech block, the temp was at 73-76. Obviously, I dont think this block is good for overclockers
